How to Become Surgeon

In medicine, surgeons are the ones who perform surgery. Surgery is a very broad category, which involves various things like vast medical treatment of cutting the body for a specific purpose. Surgery is usually done for the removal of diseased organ or cure a tear or breakage. Surgeons can be dentists, veterinarians or physicians. Earlier, many people were trained for the removal of bladder stones, but now specialized practitioners are first trained to be general physicians. The procedure of minimal invasiveness is done through interventional radiology, which is also known as minimally invasive surgery. The current area of surgery, which is gaining a lot of interest, is robotic surgery. A few doctors who are general practitioners or specialize in family medicine can perform only a limited type of surgery. Surgeons are paid a good amount of salary, and their salary usually depends on the kind of surgery they perform.

Becoming a surgeon will require you to have patience and you will have to study for quiet a while. Here are some simple and important steps on how to become a surgeon.
how to become Surgeon
Steps:

  • If you have to become a surgeon then it is very important for you to attend college. You can major in any field of your choice, but there are a certain requirements, which you must fulfill. The requirements for medical school are biology (with lab), chemistry (with lab), physics (with lab) and organic chemistry (with lab). Many medical schools will suggest you to take biochemistry, since this topic will be covered in a very little time in medical school. Always remember that it a must to take MCAT. Many medical schools do not consider students who have not given this exam. You must get a good score in MCAT to get yourself into a reputed medical school.
  • Once you are admitted in medical school, then for the first two years, you will be studying science to get a hold of the medical system. The next year you will be taught about the clinical medicine system and the various branches. At the same time you will have be working as a resident surgical institute. There are many alternatives to surgical school, like dental school. Dental school will only specialize in dental surgery.
  • Next step will be that you must apply to a surgical residency. You will have to give a USMLE board exam, complete all your clerkships and get a letter of recommendation. Always remember that you must always do your internship in the same state where you want to do your future practice. During the first year of your surgical residency, work as a full time doctor at a hospital. Once you have completed one year, you will get a permanent practice license.
  • Complete your surgical residency program successfully. This program will expose you to some real surgeries and will teach you your duties. This program will approximately take five to seven years, where you will work at different places.

Tips and Warnings:

  • Always remember that failure is not the end, try to learn from your mistakes. If you are interested in becoming a surgeon then you must have strong focus and dedication.
  • You can have an alternative option of getting training with the armed forces of your country. For instance, the US military gives an offer of an accelerated program to become a surgeon.
  • Never stop the learning process. The medical field is vast so keep updating yourself with the happenings in the medical world.
Related Tags: how to become a plastic surgeon

Posted in How to Become. Tags: , , . No Comments »

How to Become Bodybuilder

Bodybuilding is not just about lifting weights. It is required for you to build up some body mass, but one must do it in the right way. A person who wants to become a bodybuilder must follow the right diet and should have a proper vitamin intake. One has to undergo weight training, right amount of calories, good dietary intakes to build the muscle mass. One of then most important things you must remember is that you have to take rest! Becoming a bodybuilder is not difficult if you know the right way to do it. Here are some simple steps on how to become a bodybuilder.
how to become Bodybuilder
Things Required:

  • Muscular build
  • Financial ability
  • Body oil
  • Fitness club

Steps:

  • Eat like a bodybuilder: if you want to have the perfect body, then you must eat food, which is rich in proteins, carbohydrates like fruits, brown rice and oatmeal. This is the type of food, which you body while burn during exercise, and help you in building muscle mass. Your diet will contribute nearly 85 percent to your success. Make sure that you strictly follow this diet; if you don’t then you will never achieve the desired target.
  • Nutrition is the most important key to bodybuilding. Many supplements are good for your body like vitamin E, C, D and iron. Protein shakes will provide you with the perfect amount of essential blocks for your muscles.
  • Have frequent and small meals at least 6 times a day, this procedure will increase the rate of your metabolism. Therefore, your body will be burning more amount of fat. Eating after every two hours is very important, if the body does not get food it will switch to catabolic diet and start gaining fat.
  • Your meal should consist of equal amounts of protein, fats and carbohydrates. If you do not have proper meal you will never get the desired result. The right kind of food is helpful in building muscle mass.
  • Workout: your workout should be based on endurance and strength. You must do exercises like led curls, squats, chest presses, dumbbell presses, bicep curls and many more. You must also do some cardio workout, as this will help in building your body endurance.
  • Always remember that you should force your muscles by increasing the number of weights you lift. Men and women should repeat the above-mentioned exercises at least 6 times.
  • You must be focused to achieve the perfect body. Once your physique starts developing, then you can start using the oils to improve the muscular appearance of your body.
  • Ask for the opinions of your friends to see if they see any changes in your appearance. It is very easy for other people to spot the difference.
  • Always remember that you must avoid diet pills. They never help and you will end up spending a lot of money.

Tips and Warnings:

  • Always keep yourself updated with the current trends, read lot of fitness magazines. Make sure that you never use any illegal substances like steroids. They are not good for your health and they are banned.

Related Tags: how to become a female bodybuilder, how long does it take to become a female body builder, female bodybuilder how long does it take, things to do to become a bodybuilder, how to become a woman bodybuilder, how to become a woman body sculpter, how to become a female body builder, how to become a body builder

Posted in How to Become. Tags: , , . 2 Comments »

How to Write Letters Backwards

A letter is a facet, which is used in an alphabetic system of writing, like the Greek alphabet and its broods. Every letter in the ‘written language’ is generally related with one ‘phoneme’ (sound) in the spoken language.

Letter alphabets are known as ’syllabograms’ in other form of writing system, which is generally indicated as a ’syllable’ or ‘logograms’, which is indicated as a phrase or word.

For many years Leonardo da Vinci maintained his workbooks in a reasonably simple code by writing letters and numbers backward. If you want to learn how to write letter backward, then follow the steps mentioned below.
how to write backward letter
Things required:

  • Blackboard (optional)
  • Chalk (optional)
  • Paper
  • Handwriting chart (printing, not cursive writing)
  • Large mirror (optional)
  • Pencil
  • Small mirror

Instructions:

  • Take a print out of the alphabet, upper and lower case. Take a paper and write numbers, one to ten, in neat handwriting. Make numbers and letters around ½ inches higher and leave space between them. Try to use the handwriting sheet for reference, while taking print out.
  • Keep a small mirror so that you can emphasize on one letter or number on the paper at a time. This means putting your paper flat on the surface and keeping the mirror nearly perpendicular to the paper, on the right and left side of the letters. Copy whatever you see in the mirror on the separate piece of paper.
  • If you get lost while copying the letters, then just put the hand-written sheet flat on the surface and place the mirror close to the sheet to emphasize on the difficult letters. The mirror will overturn the letter and will also show you how to write a letter backwards. You can copy whatever you see in the mirror.
  • Once you have copied the entire numbers and letters, put the mirror aside and use the mirror- writing sheet to copy from. Copy whatever is there on mirror- writing sheet, on a separate sheet of paper. Study the handwriting sheet carefully, remind yourself in what direction you have to move the pencil to write the letter backward. Keep practicing until you are comfortable. Letters like, upper case Q, and lower case b, j, d, k and q and numbers like 2, 3, 6 and 9 are difficult to write backward, so they need more practice.
  • If you having problems with a small mirror, then just replace your mirror with big one. You can practice on a blackboard using chalk if you are using large mirror.
  • Face the mirror. Write big letters, so that you will be able to read it correctly. While writing letters use your full arm to write it so that it appears readable in the mirror. For example, if you writing number 5, dangle your arm at the level of your chest from left to right. Take your arm down to form a line half as long as the first one. Now, use your arm to pare a half-circle below the first line. You just have written 5 and you can read it backward in the mirror.
  • Repeat this process many times in the mirror, until you become comfortable in repeating the motions. Now, write it on the black board using chalk. Write a big letter. Repeat the motion. After that, make your letter little smaller. Step by step, you will be able to bring this down to a size which you will be able to write on paper.
  • Examine yourself by writing a few letters on the paper. You will have to start writing from the right side of the paper and work to the left. Check your work in the mirror.
Related Tags: mirror writing alphabet, backwards letters, backward letters, backwards writing, how to write i love you backwards, how to write letters backwards, alphabet in mirror writing, backward letter
Posted in How to Write. Tags: , . 2 Comments »

How to Write Graffiti Letter

‘Graffiti’ is the term which is mainly used for images or the lettering scratched, painted, scrawled or marked in any style on the property. Graffiti is any kind of public marking, which can emerge in anything from the form of simple written word formats to detailed wall paintings. Graffiti was invented in ancient times. It was very popular in Ancient Greece and the Roman Empire.

In current times, normal paint, spray paint and markers have become very popularly used materials for graffiti paintings. In some countries, ruining property by doing graffiti paintings without the permission of owner is considered vandalism and it is liable to be punished by law. Most of the time, graffiti is used to convey political and social messages to people. Graffiti is also a form of art; it is displayed in exhibitions and galleries. Graffiti is also related to subversive hip-hop music as it is developed onto a pop culture. Graffiti has also been used as group signal to a mark region; it also serves as a sign or tag for group related activity. If you want to write a graffiti letter, then just follow the instructions mentioned below.
how to write Graffiti Letter
Things required:

  • Pen
  • Markers
  • Pencil
  • Tracing paper
  • Drawing paper

Instructions:

  • If you planning to write a graffiti letters, then first of all choose a word to write in your graffiti letters. Maybe you can use your nickname. Write these words in your standard style by using thick marker on a sheet of paper. You can also write a large graffiti letters by using a large sheet of paper.
  • Make an outline for the graffiti letters with the help of a thick marker. While making outlines, do not trace over the old letters, you are suppose to draw the original strokes with your thick marker.
  • Keep drawing the outlines until all your letters touch each other or overlap on each other.
  • Now, place a piece of tracing paper on your written letters or words. Evenly trace just the outlines of the graffiti letters by using pencil.
  • Now, just shift the traced outline to a fresh piece of paper.
  • Make a round line on the corners of the outlined graffiti letters. Draw lines with the help of a thick marker or pen. Now, fill colors in the outlined shapes of your graffiti letters.
  • Your balloon style graffiti letters is now done. You can make more graffiti letters of your style by just following the above mentioned steps.

Tips and warning:

  • You can experiment with highlighting your outlines. You can also make shadows or overlap your graffiti letter as you get comfortable with writing graffiti letters.
  • Some cities have decrees against graffiti, which means fines can be levied on and prison terms awarded to the graffiti artists.
  • Art material can be dangerous to your health if it is used incorrectly and without precaution. You should read and follow the entire safety instruction manual before going ahead with art materials.

You can also use How to Write cover letters to write letters.

Related Tags: how to write graffiti, how to write in graffiti, graffiti letters to trace, How to write graffiti letters, graffiti alfabet, how to draw graffiti letters, graffiti letters, how to write in graffiti letters
Posted in How to Write. Tags: , , , . No Comments »

How to Turn on Webcam

A webcam is a device used to capture videos; it is connected to the computer or other networks and it often uses a USB port or, is connected to a network, Wi-Fi or Ethernet. Webcam is mostly used for video telephony, which permits a computer to act like a video conferencing station or videophone. It can be also used for some messenger programs like Skype, Yahoo and Windows Live Messenger. Other uses of webcam are video recording or even images. Webcams are famous for low manufacturing costs and flexibility, which makes them the lowest cost form of video telephony.

The word webcam literally means a video camera that is connected to the web continuously, which gives a view for anyone visiting the web page. Webcams were originally made for continues exposure, but many people prefer privacy. Privacy is lost when Trojan Horse programs allows malicious hackers to automatically activate cameras without the user’s permission. This also provides the hackers with live videos. Apple’s old external camera called iSight was able to thwart this. Many webcams now come with a built in LED that lights up each time, when the camera is active (e.g. apple’s internal iSight)

There are many effects of webcams; it allows a user to video chat, web-casting in professional and amateur ways. Sometimes they are also used for online dating. There are many videos that are made using webcams on YouTube. They are also used for security purposes.

Here are some tips on how to use and turn on your camera, which is situated on a HP laptop
How to turn on Webcam
Things Required:

  • HP mini webcam (built in)
  • Broadband internet connection
  • Video enabled messenger program

Steps:

  • Check if the HP laptop is connected to the power cable, or if its battery is fully charged. The webcam increases the power load on your laptop. On the front side of your laptop there will be a power button; switch it on. The webcam of the laptop depends upon the hardware to run. Wait for a while for windows XP to start. Windows XP is the operating system of HP laptops.
  • Now, select the ’start’ button, which is placed on the left corner of your screen.
  • Choose the option ‘Start New Program’ and then click on the option ‘media’. You will see an icon that says ‘cheese; click on it. ‘Cheese’ is the default photo and video sharing software, which is installed in all HP laptops. This software will automatically start the built-in camera at the top of the screen.
  • Click on the ‘photo’ button on the cheese software screen, it will take a picture with the built-in webcam. You can also click on the ‘video’ option and start recording.
  • Check if your video conferencing is working. Make sure that you have an internet connection. Go to the start ‘new program’ option and click on the Skype icon.
  • Sign in into your Skype account. There will be some automated instructions on the screen to start video chat, follow those instructions. Your video chat will start immediately.

Related Tags: how to turn on webcam, turn on webcam, how to turn on webcam on laptop, how to turn on camera on laptop, how to turn on laptop camera, how to turn on web cam, how to turn on a webcam, How to turn on a web camera on a laptop
Posted in How to Turn. Tags: , , . 3 Comments »

How to Repair Grass

Grass is also known as graminoids, these are monocotyledonous and herbaceous plants. They usually have narrow leaves, which grow right from the base. In many places, especially in suburban areas, maintaining the grass lawn is a symbol of the responsibility of the homeowner in order to make the neighborhood look good. Many municipalities have certain rules and regulations about maintaining a grass lawn. Grass is also considered very important in sports, especially for those games played in the America. A few sports like cricket, tennis and golf are always dependent on the type and quality of grass on which they are played.

Grass also gives a cooling effect in the summers. One must always maintain the garden or lawn, so that it looks beautiful. Do not worry if the grass in your lawn starts to fade or becomes patchy. Here are some simple steps on how to repair grass.


how to repair grass
Things Required:

  • Compost
  • Bulb planter
  • Shovel or trowel
  • Spade or hoe
  • Straw or other mulch
  • Wooden board
  • Grass seed
  • Sod or plugs

Steps:

  • Before you start repairing the injured area of grass, take out all the weeds, dead grass and any other detritus.
  • If any patch of grass has stains of fertilizer burn, spilled substance or dog urine then flush the soil with some water before you start planting. Make sure that you cultivate the soil at least 6 to 8 inches deep.
  • Then you must spread 1/2 inches or 12mm layer of compost on the entire surface properly.
  • If you are planning to use a grass seed for planting, then you will have to sprinkle the seeds on the entire area. Then slightly ramp the seeds with the help of hoe, so that the seed is in contact with the soil.
  • After you have planted the seeds, top it up with some straws, mulch and some water. Always remember that you have to keep the soil surface moist; make sure that you do not add excess water and make it wet. You will have to do this until the seedlings have started to grow strongly. Then later you can continue your normal watering schedule.
  • If you are going to use sod, then cut a small piece, which fits the cultivated area well and set it in the desired place. Then tamp the sod with hoe, so that it is nicely in contact with the soil. You will have to keep the sod moist till the roots until the blades show some sign of active growth.
  • If you want to replant the plugs then use a bulb planter. It will help you in making holes of 4 to 6 inches in the staggered rows. Now, you set the plugs in. As for the sods, keep watering them until you see some growth.
  • Choose any method for planting, but lay a wooden board across the spot of the repaired area. This will ensure that the new grass is in level with the rest of the lawn.

Tips and Warnings:

  • Seed is not expensive and comes handy for patches. Always remember that sod will give you instant results, but it is very expensive.
  • If you want to repair the cool-season lawns, then you must do it in early fall. If you are staying in warm regions, you must do this job in late spring.

Related Tags: how to fix burnt grass, how to save dead grass, how to repair burnt grass, grass repair, how to restore burnt grass, save dead grass, how to repair grass, how to fix grass
Posted in How to Repair. Tags: , , . No Comments »

How to Repair USB

USB is a short form of ‘Universal Serial Bus’. It is used to form a connection between USB devices and a ‘host manager’. USB was invented by Ajay Bhatt; he used to work at Intel. USB was designed to replace various types of ’serial’ and ‘parallel ports’. USB helps to attach computer peripherals, like keyboards, printers, mouse, digital cameras, flash drives, external hard drives and personal media players. For these kinds of devices, USB is a very common connection method.

USB was invented for personal computers, but now it is used commonly for various machines, like Smart phones, video game consoles and PDAs. It also works as ‘power cord’ between a machine and an AC adapter, which is connected to a wall plug for charging. The USB design was made uniform by the USB Implementers Forums (USB-IF). Let us have a look at how to repair USB.

Things required:

  • Computer with a broken USB port


how to repair usb
Instructions:

  • Before you start using your USB port, check that your system is working properly. If your system says that ‘new hardware found’ but your system cannot use it, this means there is some problem with the driver of the system and not with the USB port. In this situation you should re-install or upgrade the system driver.
  • You can put in the device in another computer. If the device is working in another system, it means the problem is with your PC not with the device.
  • Try to reboot the system. Rebooting a system will help you to reset the entire programming to the default state and will resolve many problems of your system. The start up procedure also examines all the devices of the computer and can repair a USB port.
  • Now, connect the USB device to another USB port on the same system. If your device is working in new port, then the earlier port maybe has a hardware or BIOS problem. Repairing a hardware issue on USB port involves working on the motherboard, which is naturally more costly than just inserting a new USB ports.
  • Un-install the USB device manager from your system. The device manager helps to control the USB admission and sometimes gets corrupted. Repairing the USB device manager needs administrator’s rights on the system. The ideal method to un-install the device manager is to right click on the ’system’ icon and go to properties.
  • By this process the hardware setting will appear on your system. Select the hardware button and go to device manager. The device manager has the entire list of devices on your system. The next step is to open the ‘Universal bus controller’ tab. Right click on all the items under this tab and un-install them. Once the entire device has been removed, start your system again with the USB device attached. After rebooting, re-install the USB device manager. Sometimes, it will repair the bad USB ports.
  • Next thing you can do is to inspect the BIOS. Restart the system and go into the BIOS net screen. Check to ensure that every USB port is working. If they are working properly, then reset the BIOS settings to default. Sometimes, the BIOS reset will repair the bad USB port. If it doesn’t fix your USB port, then you will have to upgrade the BIOS.
  • Upgrading a system BIOS is very much based on the motherboard producer and you will have to go to the manufacturer’s web site for detailed information.
  • The next option to repair a USB port is to repair your OS (operating system). Most of the time, the USB drivers get corrupted and it can rupture the USB ports. Re-install the system files in the machine, which should repair the USB port. The system’s data files should not get corrupted in this process; keep a full back up of the system ahead of time.
  • In windows, an operating system can be set up by inserting a windows installation CD or DVD and clicking on the repair ‘windows installation’ button. To install it, you will have to follow the steps given and you will be able to repair your USB ports.
Related Tags: usb flash repair, usb repair, repair usb drive, how to repair usb, flash repair 2011, how to repair usb flash drive, how to restore computers port device, netscreen os recovery usb port
Posted in How to Repair. Tags: , , , . 2 Comments »

How to Repair a Turbocharger

A turbocharger is also known as ‘turbo’. It is a kind of gas compressor, which is mainly operated for the ‘forced-induction’ of an ‘internal combustion engine’. Turbocharger is a variety of supercharger; it raises the density of air, which enters the engine to generate high power. A turbocharger contains a compressor which is motorized by a turbine, driven by the exhaust gas of engine in spite of direct mechanical force, as with various other superchargers.

Initial companies of turbochargers used to label them as the ‘turbo superchargers’. A supercharger is an air compressor, which was used to drive induction of an engine. However, the name was soon replaced by ‘turbocharger’. Initially, the word ‘turbo supercharger’ was used to refer to an engine, which was used as ‘crankshaft-driven’ and also ‘exhaust-driven’ turbocharger. It is also termed as ‘twincharging’. Companies like ‘Teledyne Continental Motors’ still refer turbocharger as turbo supercharger. If you want to repair turbocharger, then just follow the instructions mentioned below.
how to repair turbo charger
Things required:

  • Boost controller spring
  • Oil drain line
  • Manufacturer’s service manual
  • Grease rags
  • Turbocharger assembly
  • Cleaning solvent
  • Turbocharger toolkit

Instructions:

  • Clean the turbocharger externally by using a dry cleaning solvent. Make sure that you dry away any moisture when you have finished cleaning.
  • Remove the dirt from the air passage and put back the element, which is in charge for the air cleaning
  • Make any compressor tighter for the admission of duct connections, which have become loose.
  • Discard any foreign particles, which have been stuck in the compressor covering or duct area. Remove the dust from the covering unit, as it will reduce any carbon buildup.
  • Replace the air filter. An unclean air cleaning machine can repeatedly cause oil seal seepage on or close to the compressor.
  • Adjust the level of the oil in the crankcase to the level suggested in the instruction manual of the manufacturer.
  • Investigate the hoses getting into and out of the turbo. There can be some obstacles, frequently causing extreme noise. Once you have finished checking your hoses, attach the clamps again safely and carefully.
  • Examine the spring which is attached to boost the controller. This spring can be worn over a period of time, which shows that maximum power is condensed. This spring can be easily replaced by going through the guidebook, which comes with it.
  • Check the oil drain line to find out if it’s clogged, which is a universal reason for a noisy turbo. Check if the draining oil is thick or like slush, which possibly reflects an obstacle in the line. Just replace the oil drain line with a fresh part.

Tips and Warnings:

  • The major problems with turbochargers are extreme noisiness, loss of power and blue exhaust smoke.
  • While you will be able to repair some damage to turbocharger by yourself, it’s essential to know when you need help from a professional mechanic arbitrate to avoid any further damage to your turbo.
  • Study about the variety of turbocharger problems and their respective resolutions at Taylor Diesel Group.
  • Repairing a turbocharger always needs at least two people due to the nature of the tools involved.
  • Blue smoke emitted from the engine symbolizes a repair, which needs the attention of a professional mechanic.
Related Tags: how to repair a turbocharger, repairing turbocharger, How to repair turbo, repair turbocharger, how to repair a turbo, how to fix a turbocharger, turbo repair, teledyne supercharger
Posted in How to Repair. Tags: , , . No Comments »

How to Repair Silver Chain

Silver is a very popular and precious metal, which is used for several purposes like making jewelry. From ancient times, silver has been used to create ornaments, utensils, to carry out trade and as the base of the financial system as well. The worth of the silver as a valuable metal has been considered second only to gold.

The chemical sign of the silver is ‘Ag’, which has come from the Latin word ‘argentum‘, which means ‘white or shining’. Argentum is the Latin name for silver. Silver even finds a citation in the book of Genesis, which indicates that silver was alienated from lead as early as 4th BCE by using crude forms of surface mining. This metal has been popular since ages, thanks to its beauty and grace. Silver reflects beams of light magnificently and compliments almost any skin tone. A silver chain, worn either as a bracelet or as a necklace, is a classic and charming piece of jewelry. Silver chains are available in different styles and sizes, collections from delicate to bold, traditional to modern.

Unfortunately, silver is very fragile and quickly stains or develops scratches. Most silver can be repaired by using the appropriate tools and supplies. To repair your silver chains just follow the instruction mentioned below.
how to repair silver chain
Things required:

  • Flux
  • Paintbrush
  • Pickle
  • Butane torch
  • Silver solder
  • Ruler
  • Bent-nosed pliers
  • Needle-nosed pliers
  • Jump ring

Instructions:

Repairing a Silver Chain with a Jump Ring

  • Calculate the width of a link in your silver chain by using a ruler. Measure it in millimeter.
  • Write down the shape of the silver chain’s links. They should be oval or round.
  • Get a silver ‘jump ring’. Jump ring is a small metal, generally used in creation of jewelry, which releases and locks the chain. Pick up a jump ring with a width that is of the same size (in millimeters) of the chain’s links. The jump ring has to be either ’round’ or ‘oval’. The shape of the jump ring depends on the shape of the silver chain links.
  • You can also employ ‘bent-nosed’ pliers to open the jump ring to some extent.
  • Collect the two detached potions of the broken sliver chain. Check that one full, unbroken link is present at the end of the every broken or damaged portion. Remove any portions of broken link by using needle-nosed pliers before repairing the chain.
  • Insert the open jump ring in the broken parts of the silver chain, through the two broken end links. Now, lock the jump ring with the help of ‘bent-nose’ pliers. Your damaged silver chain is reconnected now.

Repairing a Silver Chain with Solder

  • Get a silver solder to connect two parts of the broken chain, which is too minute to repair with a jump ring. Put the two pats of the broken chain in ‘pickle’ for almost 10 minutes. ‘Pickle’ is an acidic solution, which is used to wash metal after and before you solder them.
  • Take a paintbrush to spread soldering flux over the two broken links, which you want to connect together. Soldering flux is a kind of material which allows solder to flow and stick.
  • Insert a small chip of silver solder between the two broken links that you need to join. Check that the solder is in touch with both the broken links. You will have to use a solder which is smaller than the size of the broken links.
  • Apply flux into the bit of solder.
  • Heat the silver solder circuitously by using a butane torch until the solder melts completely. Switch off the torch and let the solder cool and harden. Place the newly soldered silver chain in the ‘pickle’ solution to clean it.
Related Tags: how to fix a silver chain, repairing silver jewelry, how to repair a silver chain, how to fix silver jewelry, how to repair silver chain, chain adjust silver jewellery, how to fix broken silver, how to fix a silver bracelet
Posted in How to Repair. Tags: , , , . No Comments »

How to Repair Outlook Express

Outlook express is a kind of ‘e-mail or ‘news client’, which is incorporated with Internet Explorer version 4.0 via 6.0.  Outlook Express is also come with several versions of Microsoft Windows, ranging from Windows 98 to Windows XP. It is also available for Windows 95 and Mac OS 9.  In Windows vista, Outlook Express was discarded by windows mail, after that it was discarded by Windows Live Mail as individual software in Window 7.
Outlook express is a very dissimilar application from Microsoft Office Outlook. These two applications can not share a same ‘code base’, but a common ‘architectural philosophy’ is shared between these two.  Outlook Express employs the ‘Windows Address Book’ to save contact details and integrates securely with it. In Windows XP, it also incorporates the ‘Window sMessenger’.

Outlook Express is integrated in all Microsoft enabled computers, ranging from the Internet Explorer version 4.0 to edition 6.0(former to Window Vista). Outlook Express is a ‘Web-email’ based program. It includes toolbars and factors to which Microsoft users are familiar and are contented with.  If you are not able to open your Outlook Express application, or its not working properly, then just follow the instruction mentioned below to repair it.
how to repair outlook express
Instructions

•    Close Outlook Express and shut down your computer if the program is working slowly, not opening, or not reacting. You can reboot your system if your program is running slow; it will help you to get rid of this problem.

•    Once your system is completely turned off, switch it on again and open Outlook Express.

•    Clean up the temporary files of the Internet Explorer. If these files have been damaged, your Outlook Express will have issues displaying messages. Now, open a new window of Internet Explorer and click on ‘Tools’.

•    Now, select ‘Delete Browsing History’ and click on ‘Delete Files’. When a dialogue box appears on your computer screen, select ‘Yes’ to confirm that these files should be removed.

•    Delete emails, which appear apprehensive. Find the emails from the unknown senders or those which are carrying suspicious attachments. If possible, delete these mails before opening them and vacate the deleted items folders.

•     Damaged or infected files can lead to serious issues for the Outlook Express.

•    Scan your system for viruses. Email messages are very popular medium for viruses, so you will have to update your antivirus program frequently and scan regularly. If you have installed a program to scan received emails for viruses, be sure to enable them.

•    Run the program called ‘System File Checker’ on your system. This program will help you to check damaged files in the Internet Explorer, Outlook Express and Microsoft programs as well.

•    To run this program, go to ‘Start’ button and then select ‘Run’. Enter ’sfc/scannow’ in the ‘open’ dialogue box. Select ‘OK’. Track the prompt and restart your system, once the ‘System File Checker’ program is complete.

•    If you want you can also install an antivirus program and run that program for complete computer scan. There must be viruses in your system, which is causing problem for Outlook Express. You can download AVG, Avast, Avira and Norton free versions of antivirus.

Posted in How to Repair. Tags: , . No Comments »
1 of 101234567810