The Xbox 360 gaming device has many technical problems associated with it such as 2 red rings, 3 red rings and 3 rings of death, all of which makes it useless for playing. You will come to know if your Xbox has these problems when the gaming console shows a series of red flashing lights on its face. If you know how to fix 3 rings of death problem and other errors you can make your Xbox ready to be used for playing.
The 2 red rings, 3 red rings or 3 rings of death errors occur mostly because of hardware failure. If your Xbox is under the warranty period it would be better to take it to Microsoft for repairing. However, if you warranty period has expired then you can easily fix these problems once you know what caused them in the first place. Given below are some examples:
- The first thing that you must do is to check if all the chords and wires are properly connected to your TV. In case your Xbox is showing 4 red lights it means that the audio/video cord has not been connected properly.
- Overheating of the system, when you keep it on or use it for a long period of time, is also one main cause of rings of death error. The cooling fans and vents might fail to function properly. You can fix this error by switching off the device for 2-3 hours. You can also cool the system without turning it off by referring to any DIY guide.
- Lack of voltage is also another factor that can lead to the red rings error. You can fix this by checking whether the plugs of the Xbox are properly connected to the outlet or not. You must also ensure that the outlet is not being shared by other electric equipment.
Steps for fixing red ring of death error
- The first thing to do would be to disassemble the Xbox 360 case. You will need a fine tip screwdriver to poke the holes. Then switch off the Faceplate and move up the latch on the DVD drive when you remove it. Finally unscrew the metal case under the plastic case.
- Now, unplug the cables that go into the motherboard and other small devices. Now, take out the DVD drive and then also remove the motherboard and fan from the Xbox very gently.
- Turn the motherboard to one side and snoop off the X-clamp under the heat sink using the screwdriver carefully.
- Unscrew the heat sink to get the GPU (graphic processing unit) and CPU (central processing unit) without hurrying or else you might damage your Xbox.
- Clean the CPU and GPU that you have taken out; this will stop the freezing problem of your Xbox.
- Next, apply the arctic silver thermal compound, which you can get in any computer hardware shop easily, on the GPU. Keep it aside for 15-20 minutes and then put two nylon washers on the screws that are on the heat sink.
- Place these screws back on the motherboard and add two additional nylon washers on the screws.
- Now, Place the heat sink on the tip of the screws and push them downwards and screw them tightly.
- Fit all the other parts properly in their place and turn the Xbox on. Your 3 rings of death error is now fixed.
Related Content:
Both the PS3 and also the Xbox 360 have extremely various methods they’re approaching “waggle gaming”, but is it some thing “proper” Gamers will want to use